Skip to content

Trade show booth types for exhibitors: inline, corner, peninsula and island booths compared

There are four main trade show booth types, named by how many sides are open to the aisle: inline (one), corner (two), peninsula (three) and island (four). For exhibitors pricing space: the cheapest 10x10 booth a show publishes has a median fee of $3,500 across 63 conferences.

10x10 booth, median fee $3,500 63 conferences
Lowest rate per sq ft, median $31 67 conferences

The four booth types compared

Space at the median lowest rate of $31 a square foot, before any premium. Each conference's lowest rate is usually its cheapest tier, so read these as floors: the 10x10 figure sits under the median 10x10 fee in the next table.

Booth typeSides openUsual sizesHeight limit (IAEE)Space at the median rate (a floor)What sets it apart
Inline (linear) boothOne: the front10x10, 10x208 ft back wall; 4 ft in the front half$3,100 (10x10)Neighbors on both sides and behind. The standard booth, and usually the cheapest space on a floor plan.
Corner boothTwo: the front and one side10x10, 10x20Same as inline$3,100 (10x10)An inline booth at the end of a row. Traffic from two aisles; many shows charge a corner premium.
Peninsula boothThree20x20 and up16 to 20 ft in the center of the back wall; 4 ft within 5 ft of each aisle where it backs onto inline booths$12,400 (20x20)Its back is against other booths. Room for a demo area and a large back-wall graphic.
Island boothFour20x20 and up16 to 20 ft, signage included, across the whole space$12,400 (20x20)No neighbors at all. Usually the most expensive space per booth (PPAI adds 15%), and the one where the tallest builds go.

Published booth fees, US dollars, ConferenceDB; rate per square foot is each conference's lowest, so space is a floor and 20x20 is extrapolated, not a published fee. Definitions: IAEE display guidelines, read 2026-11-20.

Height limits are the IAEE recommendations; each show sets its own in its exhibitor manual. IAEE allows hanging signs over peninsula and island booths, usually up to 16 to 20 feet to the top of the sign, set back 10 feet from neighboring booths, and recommends that island booths be no smaller than 400 square feet. A perimeter booth along the hall wall keeps the inline rules but may have a 12 foot back wall.

Premiums are set show by show. One published example: the PPAI Expo 2026 rate sheet adds 12% of the booth fee for a corner, 12% for a peninsula and 15% for an island, with a 400 square foot minimum for peninsulas and islands (PPAI Expo 2026 pricing, sheet dated April 4, 2025, read 2026-11-20).

What booth space costs by size

Cheapest published fee for each size, each conference once.

SizeBooth types usually sold at this sizeConferencesMedian feeMiddle half
10x10 (100 sq ft)Inline, corner63$3,500$1,998 to $4,500
Per square footAny, lowest rate listed67$31$18 to $44

Booth, table and exhibit-space fees conferences publish, US dollars, latest priced edition, ConferenceDB.

Which booth type to book

First show, or a small team: an inline 10x10. It is usually the cheapest space, the exhibit can be a pop-up or banner stands, and many booth packages include the pipe and drape, a table and chairs.

Same budget, more traffic: a corner booth of the same size, if the corner premium is small. It opens to a second aisle. Many shows hand out the best space, corners included, by booking date or priority points, so book near the early-bird deadline.

Product demos, meetings, a bigger crew: a peninsula. Three open sides give room for a demo area and a meeting space, and the back wall can carry a large graphic.

A flagship presence: an island. It usually needs a custom exhibit, a hanging sign and union labor for setup in many US halls, so the space fee is often the smaller part of the bill.

Budget past the space. GES, a show contractor, notes that corners and spots near the entrances cost more, and that industry surveys put a whole show at about three times the cost of the space (GES exhibitor budgeting guide, read 2026-11-20). At the median 10x10 fee above, that rule of thumb puts a first show at roughly $10,500 all in, a rough guide since the median is of each show's cheapest 10x10.

Before booking any type, read the show's exhibitor manual for its height limits and corner or island premiums, and check the floor plan for where the aisles and entrances are.

Booth type and exhibit style are two different choices

The booth type is the space you rent from the show. The exhibit is what you put in it, bought or rented apart from the space. Any style can go in more than one type, but some fit a type better.

Exhibit styleWhat it isUsually fits
Banner standsRoll-up printed graphics, carried by one personTabletop, inline
Pop-up displayA folding frame with a fabric or printed back wall that sets up without toolsInline, corner
Modular exhibitPanels and frames that reconfigure from a 10x10 back wall to a larger spaceInline, corner, peninsula
Custom exhibitA structure designed and built for one company by an exhibit house, often with a hanging signPeninsula, island

Other booth types you will see

TypeWhat it is
Perimeter boothAn inline booth along an outside wall of the hall, with no booth behind it. IAEE puts its back wall at up to 12 feet, against 8 feet for an inline booth.
Split islandA peninsula booth that shares its back wall with another peninsula booth. Without inline booths behind it, the whole space can go to full height.
TabletopA 6 or 8 foot draped table instead of a booth, common at regional shows and association meetings, and usually the cheapest way to exhibit.
Shell schemeA booth with ready-built walls, a name board, carpet and lights, common at shows in Europe, Asia and the Middle East.
Booth packageSpace sold with the basics included at one price, so it can be any of the types above.

How this was counted

Prices are the booth, table and exhibit-space fees conferences publish, in US dollars. A fee counts toward a size when its name states the size in feet (for example "10' x 10' booth"). Each conference counts once, at its latest edition with prices: its cheapest 10x10, 10x20 or 20x20 fee, and its lowest fee per square foot across the sized booths it lists. A size shows only when 50 or more conferences publish it.

Published lists rarely name the booth type, so the table by type prices the space at the median of the lowest per-square-foot rates, multiplied by the type's usual size. Corner, peninsula and island premiums are set by each show and are not in that figure. The definitions follow the IAEE display guidelines most US shows copy into their exhibitor manuals; a show's own manual wins where it differs.

Questions

What are the types of trade show booths?

Four main types, named by how many sides open to the aisle: inline (one), corner (two), peninsula (three) and island (four). Shows also sell perimeter booths along the hall walls, split islands, tabletops and, outside the US, shell scheme booths.

What is a peninsula booth?

A booth open to the aisle on three sides, with its back against another booth, usually 20 by 20 feet or larger at the end of a row of inline booths.

What is an island booth?

A booth open on all four sides with no neighbors, usually 20 by 20 feet or larger. It is usually the most expensive type of space, and shows usually allow taller structures and hanging signs on it.

How much does a 10x10 trade show booth cost?

The cheapest 10x10 booth a show publishes has a median fee of $3,500 across 63 conferences, with the middle half between $1,998 and $4,500. That is the space only; the exhibit, furniture, power, shipping and labor cost extra. See trade show booth cost by industry.

Find the companies behind these numbers

Free, no account. Companies only, never named people.

Pick an industry and a place, or type your conference, and see the companies that sponsor or exhibit at the most conferences like it.

Find sponsors for my conference

More: Trade show and sponsorship glossary · Trade show booth cost · Are trade shows worth it · Exhibitor lists · Trade show directory

Sources